Pipe Thread Tape - PolyEthlynene 11719
Home || Pipe Thread Tape - PolyEthlynene 11719
Pipe Thread Seal Tapes...
Unsintered Virgin Polytetrafluoroethylene (PTFE)
ITPTFE-35S... Standard Density
ITPTFE-35H... High Density
100% Virgin PTFE. 3.5 mil white film in labeled plastic spool/box. Available in Standard Density (PTFE-35S) and High Density (PTFE-35H). Lubricates joints, making them easy to assemble for leak proof seals. For all industrial applications, including water, oil, gas, most chemicals, hydraulic and high pressure lines. MIL Spec T-27730A & UL31 RO. Elongation >50%. Temperature Range: -450°F to 500°F. 5 sub-packs per carton.
Physical Properties...
Density
Tensile Strength
​
PTFE-35S
Standard Density
0.35 g/cm3
>8 N/mm2
​
PTFE-35H
High Density
0.80 g/cm3
>10 N/mm2
Alternative to 3M #48 & #547.
Polyethylene Film Tapes...
ITLDPE-5A
with Acrylic Adhesive
5.5 mil (0.14mm) Low Density Polyethylene Film Tapes. Good abrasions, chemical, tear and UV resistance. Excellent moisture barrier. Used for color coding, decorative markings, stripping, sealing, splicing & seaming. 3" plastic core.
Applications...
Provides high adhesion and cohesion which yields a permanent bond with virtually no edge bleed out. Excellent long term aging stability without yellowing. Will not crack or crease at low tem peratures.
Physical Properties...
36Yd COLORS (8): Clear, black, white, red, green, blue,
yellow & orange.
36 YD (33M) 108 FT
Adhesive
Tensile Strength Elongation Adhesion to Steel
Application Temperature Operating Temperature
(*Other colors available as special order.)
​
Acrylic
11 lbs/in.
400%
50 oz/in. 50°F to 120°F
-40°F to 190°F
​
NOTE: ITLDPE-5AE has been discontinued (see LDPE-5A).
60 YD (55M) 180 FT​
60Yd COLOR (1): Clear.
Alternative to 3M #480; Palco #502A, #503A.
ITLD PE-5R...
with Rubber Adhesive
5.5 mil (0.14mm) Low Density Polyethylene Film Tapes. Good abrasions, chemical, tear and UV resistance. Excellent moisture barrier. Used for color coding, decorative markings, stripping, sealing, splicing & seaming. 3" plastic core.
Applications...
Ideal for polyethylene splicing; general purpose sealing, spiral wrapping. Suitable for use in nuclear and other sensitive environ ments. Highly conformable and adheres to most surfaces. Works well in most applications where lovv' to moderate adhesion is required.
Physical Properties...
Adhesive Tensile Strength Elongation
Adhesion to Steel Application Temperature Operating Temperature
​
Rubber 11 lbs/in.
400%
25 oz/in. 50°F to 120°F
-40°F to 190°F
36 YD (33M) 108 FT
4 COLORS AVAILABLE: Clear, black, white & red.
Alternative to 3M #483; Palco #502R & #503R.
