top of page
19446861_1_Ecer_Tech_Background-71_1 Ecer Background-71.jpg

Florescent Cloth - Friction 11539

Home   ||   Florescent Cloth - Friction 11539

Fluorescent Cloth Tapes

ITDT-70F...

Fluorescent Duct Tape
11.8 mil. High tensile, high quality fluorescent PE coated cloth with a natural rubber/synthetic resin adhesive. Superior performance duct tape specifically designed for the high demand contractor applications. Easy tear and unwinding. Its water resistant adhesive system allows this product to bond to almost any surface, including porous surfaces. Used for night amusement industry such as night club, karaoke and music hall or show window that is used under black light. Adhesion/Steel: 35 oz/in. Tensile Strength: 33 lb/in. Temp. Resistance: - 31 deg * F to 106 deg * F 3" neutral core/carton.
4 COLORS AVAILABLE: Fluorescent pink, yellow, green & orange.

Alternative to Shurtape #PC619..

29.1-ITDT-70F....png
29.1 Image 1.png

ITCGT-80F... 

Fluorescent Gaffers/Spike Tape (low gloss) 11.8 mil. High quality fluorescent PE coated cloth laminated to a low gloss finish film, coated with a natural rubber adhesive. Suitable for entertainment type applications (concerts, trade shows, etc.); for holding down cable, wires, electrical cords, and marking stage placements (i.e. "spike" tape). Hand-tearable, conforms well to irregular surfaces, and will not twist or curl during application. Excellent water, vapor and abrasion resistance. Clean removal on most surfaces. Adhesion/Steel: >25 oz/in. Tensile Strength: > 36lb / i * n . Temp. Resistance: -31°F to 176 deg * F 3" neutral core/carton.
4 COLORS AVAILABLE: Fluorescent pink, yellow, green & orange.

29.2-ITCGT-80F..png
29.2 Image.png

ITFCT-665... 

Fluorescent Gaffers/Spike Tape
(matte finish) 11.5 mil. Heavy-duty fluorescent vinyl coated tape with a strong natural rubber adhesive. This product has a matte-finish for less reflectivity and low sheen. Used for wrapping or bundling wires, tools, and handles. Suitable for bookbinding and entertainment type applications (trade shows, photography, film industry) where minimal visibility of tape is desired. Allows for a clean removal, leaving no residue. Adhesion/Steel: 50 oz/in. Tensile Strength: 42 lb/in. Temp.
Resistance: 40 deg * F to 200 deg * F 3" neutral core/carton. 4 COLORS
AVAILABLE: Fluorescent pink, yellow, green & orange.
600YD JUMBOS AVAILABLE.

Alternative to Berry Global #510; Permacel #660; Scapa #125FL:

29.3-ITFCT-665..png
29.3 Image.png

Friction Tape...

ITFT-15...

13.3 mil. Black cotton cloth with non-corrosive rubber resin adhesive. Hand-tearable, extremely conformable, highly resistant to humidity and galvanic corrosion. Holds tightly on rough and irregular surfaces. Adhesive will not dry out. Used for insulation and to protect industrial harnesses and electrical wires from physical damage caused by friction, for over wrapping low voltage splices and general electrical maintenance jobs. Dielectric Strength: 1kV. Insulation Class: 176 deg * F Tensile Strength: 46 lbs/in. Elongation: 4%. Meets ASTM 4514-85. Individually cello-wrapped (no label) - 10 rolls per tube sleeve. 1 ^ 1 /2^ prime prime (38.1mm) neutral core.

29.4-ITFT-15....png
29.3.1 Image.png
Untitled-2-01 (1).png

Hight Composites and Tapes is a leading supplier of band sealer belts, sealing bands, heat resistant tapes & fabrics to clients in South Texas.

CONTACT US

210-559-8096​

hank@hmtape.com​

7634 Presidio Cove Boerne, TX 78015

NEWSLETTER

Thanks for submitting!

PAYMENTS ACCEPTED -

payment_logos-1.png

© 2025 By Hight Composites and Tapes. All Rights Reserved.

bottom of page