Aluminumfoil1 12014
Home || Aluminumfoil1 12014
Aluminum Foil Tapes (without liner)...
ITF20SW... Self Wound, Acrylic Adhesive
2.0 mil self-wound dead soft malleable aluminum foil coated with acrylic adhesive. Malleable foil conforms well to irregular surfaces. Excellent harness wrap tape. Designed for non-critical applications such as sealing out dust and moisture, masking and duct sealing. Can be used for heat reflection in the appliance industry and as a mask for electroplating. This linerless product saves time and labor in stripping of release liner and produces less waste.
Total Thickness: 3.6 mils.
Adhesion to Steel: 40 oz/in.
Tensile: 26 lbs/in.
Elongation: 4%.
Temperature Range: -40°F to 302°F.
3" neutral core.
WIDTH :
1-5
RLS/CS :
6-11
CASES :
12+
60 YD (180 FT)
Alternative to 3M #4380; L.amart #215; Venture #807-2 & #2520CW.
ITF3OSW... Self Wound, Acrylic Adhesive
3 mil high strength self-wound dead soft aluminum foil coated with an aggressive acrylic adhesive system to create a superior bond. Designed to stick firmly to its own backing. Malleable foil conforms well to irregular surfaces. Premier product for masking in paint stripping and electroplating. Used for waterproofing, vapor barrier and air leakage protection, metal patching and sound dampening, as a sealing system in refrigerated appliances and microwave ovens. High reflectivity assures effective heat, light interference, and electrical insulation shielding. 3 mil foil protects outdoor cable splices. Can be applied at low temperatures.
Total Thickness: 4.8 mil.
Adhesion to Steel: 40 oz/in.
Tensile: 36 lbs/in.
Elongation: 5%.
Temperature Range: -58°F to 302°F.
3" core.
WIDTH :
1-5
RLS/CS :
6-11
CASES :
12+
60 YD (180 FT)
Alternative to 3M #425 & #34383; Pennacel #P-14; Lamart #213M; Polyken #345; Shurtape #AF-75; Scapa #T3612; Ideal #489.
Aluminum Foil/Scrim/Kraft Tape...
ITfSK-A... with Acrylic Adhesive
ITfSK-R... with Rubber Adhesive
A 4.8 mil 3-way dead soft aluminum foil/fiberglass scrim/paper backing coated with a 2 mil aggressive adhesive and wound with a 3.2 mil removable paper release liner. Malleable foil conforms well to irregular and curved surfaces to maximize adhesive contact and provide quick, positive grab to the insulation surface.
Used as a closure system for fiberglass and mineral wool insulation systems that are faced with foil, to seal seams and joints on aluminum-faced fiberglass duct board, and to provide a vapor barrier that assures the integrity of the system.
3" neutral core.
47.25" (1200mm) x 730M Jumbos Available.
50 YD (150 FT)
Specify ITFSK-A or ITFSK-R when ordering.
Alternative to Nashua #338FSK
