Polyethelyene Tape 7 - 9 11726
Home || Polyethelyene Tape 7 - 9 11726
Polyethylene Film Tapes...
​ITLDPE-7R...
7.0 mil (0.178mm) total thickness. 4.5 mil low density polyethylene film coated on one side with a synthetic rubber adhesive. Tough polyethylene backing offers good abrasion and tear resistance. Low tack adhesive suitable for surface protection applications. Excellent for low temperature bonding. 3" paper core.
Applications...
Ideal for wire identification, surface protection, seaming and splic ing of films.
Physical Properties...
60 YD (55M) 180 FT
Alternative to Scapa #135; Berry Global #833 & #757.
Adhesive Tensile Strength Elongation Peel Adhesion Adhesion to Backing
Synthetic Rubber
18 lbs/in.
80%
​
60 oz/in. 4 COLORS AVAILABLE: Clear, black, white & red.
35 oz/in. (*Other colors available as special order; MOO = 6 logs.)
ITLDPE-7R/UV...
7.0 mil (0.178mm) total thickness. 4.5 mil low density polyethylene film coated on one side with a synthetic rubber adhesive. Backing has been stabilized with additives to resist the effects of UV expo sure. Leaves *no residue* upon removal on most surfaces (testing
required). Maintains a water tight seal in all weather conditions. Its adhesive system remains permanently tacky and bonds well to most
surfaces over a wide range of temperatures. 3" paper core.
Applications...
Designed for masking of windows and doors in stucco applica tions. Ideal for polyethylene splicing or seaming in construction applications.
Physical Properties....
conditions/temperature of exposure, surfaces, etc. Should be thoroughly tested in the specific application.
60 YD (55M) 180 FT
Adhesive Tensile Strength Elongation
Peel Adhesion Adhesion to Backing
​
Synthetic Rubber
18 lbs/in.
80%
60 oz/in.
35 oz/in.
​
Alternative to Scapa #234, Berry Global Red Baron #824 & #836; Permacel #224LB; Cantech #250.
2 COLORS AVAILABLE: White & red.
*Note: Clean removability is dependent upon dwell time, the
ITLDPE9R...
9.0 mil (0.229mm) total thickness. 5.5 mil low density polyethylene film coated on one side with a synthetic rubber adhesive. Remains permanently tacky and bonds well to most surfaces over a wide range of temperatures; excellent low temperature bond. Tough polyethylene backing offers good abrasion and tear resistance. Highly conformable, waterproof and resistant to chemical deteri oration. 3" paper core.
Applications ...
Ideal for polyethylene splicing; patching/repairing poly sheeting used in boating and RV industry; surface protection & electroplate masking; wire identification; packaging; etc. Works well in most applications where a low thread-count polyethylene coated cloth tape is being used.
Physical Properties...
36 YD (33M) 108_FT
​
60 YD (55M) 180 FT
Adhesive
Tensile Strength Elongation
Peel Adhesion Adhesion to Backing
​
Synthetic Rubber
22 lbs/in.
100%
70 oz/in.
35 oz/in.
-13-
​
Alternative to 3M #481, Berry Global #827; Scapa #136; PATCO #5400; Shurtape #VP555; Cantech #278.
7 COLORS AVAILABLE: Clear, black, white, red, green, blue & yellow*. •
